Send your power bill via WhatsApp and get a personalized savings estimate within 48 hours. No obligation, no pressure.
Send your bill on WhatsAppA hidden penalty called Low Power Factor silently inflates commercial electricity bills. We fix it with a small panel called an APFC — installed next to your meter. You do nothing — the bill drops, forever.
Every motor, compressor, AC, freezer, fridge, fan, ballast, and transformer in your shop draws two kinds of power from the grid. You use one. You pay for both.
You probably don't scan your bill closely — most of us don't. Power factor surcharges hide in plain sight — sometimes ₹2,000 to ₹8,000 per month on a mid-sized shop.
Add a new freezer, a second AC, better lighting? The hidden charge creeps up every time. Shops more than five years old typically pay the highest penalties — loads have grown but the wiring hasn't been corrected.
Dirty power makes compressors run hotter, lights flicker, and motors fail sooner. You feel the symptoms long before you see the cause.
Chronic low power factor in commercial connections can trigger warnings, penalties, and in some states, disconnection by the electricity board.
Two tariff changes in Telangana turned a quiet inefficiency into a line item that grows as your shop grows. If your bill looks worse than it did two years ago for the same work, this is why.
Commercial connections above 10 kW are now billed on kVAh — apparent energy — instead of kWh. You are charged for the power you draw, not the power you actually use. A poor power factor inflates the bill for exactly the same work.
TGERC has directed the DISCOMs to charge leading kVArh. A fixed capacitor bank that over-corrects now costs you money instead of saving it — so the old "install a bank and forget it" approach is no longer safe.
Cafés, restaurants, salons and clinics in the 15–120 kW range run swinging HVAC and refrigeration loads, with nobody watching the meter. A fixed bank cannot follow a load that changes every hour. An automatic, self-adjusting panel can.
An APFC panel is a small steel cabinet — roughly the size of a mini-fridge — that mounts on a wall next to your main electrical panel.
Inside, a sensor watches your shop's power usage every second. When it detects the "froth" building up, it instantly connects the right amount of capacitors to cancel it out. When the load drops, it disconnects them.
It does this 24 hours a day, 365 days a year, with no input from you. No buttons. No switches. No maintenance routine. It just quietly keeps your bill clean.
You install it once. It works for 5+ years. After payback — typically 4–10 months — every rupee saved is pure profit.
The panel sits on your main feed, which means it already measures everything behind it. The same signal that proves your saving can tell you what is running, what is drawing abnormally, and what has stopped.
When a motor stops drawing current, you get a message — not a report next month. Built to get through on weak rural networks.
Green, grey or red per device. No dashboard to learn, and a Telugu-first interface for the people actually on site.
A single clamp on the main feed reads every motor behind it. Nothing to fit on individual machines, nothing to rewire.
Clean power runs compressors and motors cooler. Uptime you can see is uptime you can actually protect.
Monitoring is rolling out across our panel range — ask us what is available for your connection type and site today.
Lower bills are the headline. But the quieter wins — longer equipment life, stable lighting, more headroom — are the ones you'll notice day to day.
Penalty charges vanish. Incentive rebates (where applicable) kick in. The drop shows up on your very next bill cycle.
ACs, freezers, compressors, ballasts, and motors run cooler with clean power. Equipment on clean power lasts 20–30% longer on average — fewer emergency call-outs, lower repair costs.
That dip in lighting every time the AC compressor kicks in? Gone. Lighting stays steady — great for salons, cafés, and theatres.
Correcting power factor frees hidden capacity in your wiring. Add a new freezer or AC without applying for a load upgrade.
Billing machines, POS terminals, CCTV, sound systems, and projectors run without the micro-stutters and resets that dirty power causes.
No more warning notices. No penalty arrears. No risk of commercial disconnection for chronic low power factor.
If your shop has an AC, a freezer, lighting, or motors — and a commercial electricity connection — an APFC pays for itself — typically in 4–10 months.
High lighting loads, water heaters, and constantly running ACs make your salon a textbook APFC case.
Coffee machines, convection ovens, display fridges, and air conditioning add up fast. Lots of motor-driven loads.
Heavy HVAC and inductive lighting loads, with spikes when shows change. One of the highest-saving segments.
Freezers run 24/7. High continuous motor load. APFC plus good freezer health can cut 25–30% off your bill.
Motor-heavy equipment + heavy HVAC + long operating hours. Strong savings profile, quick payback.
Large cold chain loads + bright lighting + checkout tech. Every percentage point saved is worth real money.
Your exhaust motors, walk-in chillers, and industrial kitchen create perfect conditions for power factor penalties.
Fast-switching, high-variability loads. Specialized APFC with quick response is essential — and pays back fast.
24/7 industrial refrigeration = the highest ROI category. Payback often under 10 months.
Your round-the-clock aerators and water circulation pumps create heavy inductive loads. APFC correction delivers rapid payback.
Heavy motor loads running continuously — conveyors, crushers, dewatering pumps, and ventilation systems.
Aquaculture is the one place where the electricity bill is the smaller problem. Aerators run around the clock, and a single failure nobody notices overnight can suffocate an entire pond — months of income, lost by sunrise.
Aerators, circulation pumps and feeders run continuously. That is both a large power-factor penalty and a large surface for things to fail on.
A stopped aerator at 2 AM is invisible until someone walks the bund at dawn. By then dissolved oxygen has already crashed.
Device-level stop alerts pushed to your phone, in Telugu, designed to get through on the networks coastal farms actually have.
The same correction that protects the pond removes the power-factor penalty on your pumping load. The saving funds the protection.
Enter values from your electricity bill to see your potential ROI. Look for KVAH, KWH, and RMD readings.
These are conservative estimates based on a typical commercial tariff with 15–30% reduction after APFC installation.
Your actual savings depend on your current power factor, tariff slab, operating hours, and equipment mix.
Send last month's power bill via DM — we'll calculate your exact number within 48 hrs. Free, no obligation.
This is an actual TSSPDCL connection — SC 113400807, July 2026. The meter billed 8,935 kVAh while the equipment only consumed 7,674 kWh. That 1,261 unit gap is reactive power, charged at the full ₹8.18 tariff.
We stopped asking anyone to take a savings claim on trust. Your next electricity bill is the only proof that counts — so we built the payment terms around it.
50% when the panel is installed and commissioned on your wall. Nothing before that.
The power-factor penalty is gone from your own statement. You are reading the proof on your bill, not in our brochure.
We bank the post-dated cheque for the remaining 50% — after you have already seen what you are paying for.
We buy the unit back at 50% and take it away. You are not left holding equipment that didn't do what we said it would.
Our price sits at the ordinary end of the market — about what you would pay anyone for a plain APFC panel and installation. The monitoring, the risk-free terms and the buy-back are not a premium package. They are what comes in the box.
Photo of last month's power bill to our WhatsApp. That's it.
We calculate your exact savings, recommend a panel size, and share a written proposal.
Our technician installs and commissions the panel on-site. No shop closure needed.
Your very next bill reflects the savings. We follow up to confirm, then stay out of your way.
If you're on TSSPDCL (Telangana Southern Power Distribution), we can fetch your actual bill data, calculate your exact power factor, and generate a detailed savings report — automatically.
Example SC Numbers: 113400807 (LT) · SEC2112 (HT)
Look at your last electricity bill. Somewhere on it will be a "Power Factor" value (often near the consumption section). If it's below 0.95, you're losing money. If it's below 0.9, you're almost certainly paying a direct penalty. Send us your bill — we'll read it for you in minutes.
For a typical commercial shop, panels start from ₹15,000 and go up to ₹2,00,000 depending on load and configuration. Payback is typically 4–10 months from savings alone. We only recommend the size you actually need — no oversizing.
No. Installation takes 2–3 hours and happens during a brief planned power-off window — usually early morning or after closing time. We coordinate around your hours.
Every installation includes a post-install verification. We confirm your new power factor is above 0.98, and check your next bill together. If we were wrong about the savings, we make it right.
Almost none. The panel is designed to run unattended for 5+ years. We do recommend a visual check once a year — which we'll happily do if you're within our service area.
The panel handles normal load growth automatically — up to its design capacity. If you add a major new load (like a large freezer or second AC), send us a message and we'll advise whether the existing panel still fits or if you need a small add-on module.
Panels are built to IP42/IP55 standards with surge protection, MCCB isolation, and automatic cut-off on fault. They're designed for Indian commercial conditions — heat, humidity, grid instability, the works.
That's it. No forms. No calls. Within 48 hours, you'll get a written estimate of exactly how much you'll save, what panel size fits your shop, and how fast it pays back. Free. No obligation. No sales pressure. If the numbers don't work, we'll tell you that too.
Need a written quote or spec sheet? Email info@deepandwide.in with your last bill.